Blanks of STANDARD AND SPECIAL MATERIAL BASED PP (polypropylene)


Blanks of STANDARD AND SPECIAL MATERIAL BASED PP (polypropylene)

  • sheets with thicknesses of 0.5 to 200 mm;
  • thin-walled tubes with diameters from 10 to 1000 mm;
  • fittings with diameters of 16 to 1000 mm;
  • solid rods with diameters from 6 up to 800 mm;
  • thick-walled tubes with diameters of 125 to 450 mm;
  • profiles and electrodes;
  • electrical connecting fittings;
  • valves.

This is the lightest thermoplastic whose mechanical properties are superior than those to the polyethylene. Its main use is focused on the chemical industry where overall strength coupled with a good resistance to alkalis and acidic. At room temperature polypropylene is stable to almost all chemical attacks, while at 70˚C can hardly be affected. This plastic has very little environmental impact. Greater hardness or wear resistance of abrasion can be achieved when the material is reinforced with glass fibers.

Some of its main features are:

  • Good stability at high temperatures;
  • Easy workability and low specific weight;
  • High chemical resistance;
  • High durability;
  • Excellent electrical insulator;
  • Minimum water absorption;

PP-DWU :Homopolymer resistant to constant temperature
PP-DWU-SK :Masked with polyester, for last overlay.
PP-DWST :Homopolymer resistant to constant temperature, natural.
PP-EL-S :Homopolymer, electrically conductive, lingering combustion.
PP-C-PK :Block copolymer, backed with polypropylene.
PP-бял :Homopolymer, the ability to adjust the color.
PPs :Homopolymers lingering combustion.
PPs бял :Homopolymer, lingering combustion, white.
LONGLIFE :Stands for cutting.

PP-DWU embossed : Homopolymer, resistant to constant temperature, gray-sided embossed.
PP-DWU-GK : Masked with glass.
PP-DWU-B : For vessels which require certification made after testing.
PP-DWU-B-DIBt : For vessels which require certification made after testing.
PP-DWU-B-SK : For vessels which require certification made after tests masked with polyester.
PP-DWU-UV : UV-stabilized.
PP-DW-CU : Homopolymer, stabilized against silver and heavy metals.
PP embossed : homopolymer unilaterally stamped.
PP-AS : homopolymers antistatic.
PP-TV : Homopolymer reinforced with talc.
PP-EL : Homopolymer, electrically conductive.
PP-EL-SK : Masked with a polyester
PP-TE : Homopolymer, used in electrical engineering.
PPs-AS white : Homopolymer, lingering combustion, white.
PP-R : Random copolymer.
PP-C : Block copolymer.
PP-C-DWU-B : For vessels which require certification made after testing.
SIMOCART : Copolymer, embossed.

Ask for product

The fields marked * are mandatory

Name *

Phone

E-mail *

Subject*